The PD1 is a gas powered fixed wing and delivered as a ready-to-fly solution, standard equipped with a EO/IR camera system, long range encrypted data link and a professional ground control station. The PD1 can stay up in the air for up to 10 hours with 8 kg of payload.

Modular "FASTLINK" design

The PD1 has a modular design, all airframe parts are secured with fastlink locks with no tools needed for (dis)assembling de drone to maximise efficiency. It can be operational and in the air within 10 minutes from being packed in a secured transportation-case. The modular design allows you to easily and quickly replace all airframe parts, engine unit, payloads and other equipment on board. The payload area is big enough to fit a dual sensor gimbal and photo camera or any type of similar equipment.

Fully programmable

PD1 UAS is standard equipped with an advanced autopilot system which allows to perform fully autonomous flights with a pre-programmed route, actions (e.g. take photos or drop a package at certain points), automatic take-off and landing, parachute recovery and much more. All information from the PD1 (e.g. fuel level, engine temp/RPM, live view etc.) is streamed securely and in real-time to the Ground Control Station (GCS). The drone is also capable of performing fully autonomous flight without any connection to its GCS

null

Discover UGCS

3D flight planning software →

LS Micro Vux LR is the next generation LIDAR solution, a product suitable for both corridor and area mapping. Based on the Riegl VUX-1LR, survey grade FOG IMU, and including a 50mp RGB calibrated camera fully integrated. It can be operated at higher altitudes and covers more area on unmanned missions.

LS Micro Vux LR automatically collects highly accurate laser and image data via its onboard system controller. It can produce DOMs, DEMs, DSMs and DTMs which may be further processed to produce 3D models for various industries.

LiDAR integration

LS Micro Vux LR is the next generation LIDAR solution, a product suitable for both corridor and area mapping. Based on the Riegl VUX-1LR, survey grade FOG IMU, and including a 50mp RGB calibrated camera fully integrated. It can be operated at higher altitudes and covers more area on unmanned missions.

LS Micro Vux LR automatically collects highly accurate laser and image data via its onboard system controller. It can produce DOMs, DEMs, DSMs and DTMs which may be further processed to produce 3D models for various industries.

Advanced payload

A wide range of different payload options can be exchanged within the PD1 system. Standard equipment includes a USG-212 EO/IR gimbal or USG-211 EO gimbal. Both camera gimbals featured 30x optical zoom, digital video stabilisation and target tracking. Furthermore, there is enough space left in the payload area to meet specific needs such as a secondary payload sensor, SAR radar, radio repeater etc.

USG-211

null

Discover more

USG-212

null

Discover more

High-res aerial photography

The PD1 will be ready-to-fly with a high-resolution photo camera and software that allows to process and analyse captured data. The sensor can take pictures with a resolution of up to 10 pixels/cm while the drone is flying at an altitude of 1000 meters. Our software package consists of great features, such as the ability to compare photos with the flight log file, which allows you to find coordinates at targeted objects on a photo, mark up and specify objects of interest, see where the UAV was at the moment when photo was taken and generate standard reports. This solution cuts down overall time needed to analyze aerial photography materials and get most out of it.

Logistic applications

PD1 can be equipped with a package delivery system. It can carry up to 7 kg of payload in one piece or in separate containers, which can be dropped with parachutes. Container size and shape could be customised according to specific applications.
Applications:
  • Fast supplies and ammunition delivery to military units. Container holds more than 500 NATO standard .223 cartridges;
  • Deliver medications to remove areas; Container holds four P650 UN3373 packages;
  • Coast guard. Carry two self–inflating lifesaving buoys to help people in need;
  • And much more

Parachute recovery

PD1 can be equipped with a parachute recovery system including an airbag to make any landing softer. It can be used as main recovery method or as an emergency option. Parachute landing could be done in fully automatic mode.

Propulsion system

The system is powered by a quiet and reliable 61cc 2-cylinder 4-stroke engine with a 150W electric generator system that can power up all equipment on-board during the flight. In addition, a remote start system can automatically start the engine in any condition under any circumstance. Electric fuel injection upgrade is available for maximum performance and adds 15% more endurance. The engine unit can be easily replaced, so you don’t have to interrupt drone operations for engine maintenance or overhaul. RPM, temperature and fuel level sensors are standard equipped.

Applications

Applications

Military

Our solution has received positive feedback from Army officers, drone operators and Intelligence Agents. PD1 has anti-jam capabilities, allowing it to be operated without GNSS signal or even when it faces GPS spoofing or control signal interception attempts.

Industrial

Our solutions with Thermal cameras, LiDAR sensors and other special payloads can help you to complete most industrial tasks, such as inspections, hazard environment tests and other common tasks in different industries.

Mapping

The PD1 is made to cover large areas and long distances in any environment. Capable of carrying the most advanced payload options to maximise the quality and efficiency of collecting data in mapping or photogrammetry missions.

SPECS

Flight modes

Flight route Programmable
Take-off and landing Automatic
Auto-return in case of signal loss

Flight ranges

Flight time 10+ hours (8KG payload / 12L fuel)
Service ceiling 3000M
Single mission  >1000KM

Measurements

Wing-span 4-5 M
Long endurance fuel tank 12L
Payload capacity 10KG
MTOW 40KG

Communications

Encrypted real-time full HD video 50-500 KM
Encrypted datalink 85-500 KM
Satellite navigation GPS/GLONASS
Satellite datalink Optionally

USG-212 EO/IR Gimbal

 

Full HD day-view camera
30x optical zoom
Thermal camera
Digital video stabilization
Target tracking
Target coordinates recognition

USG-211 Full HD Gimbal

 

Full HD day-view camera
30x optical zoom
Digital video stabilization
Target tracking
Target coordinates recognition